Close
84 projects
4k
41
28
Rezodo aims at building a distributed irrigation system and a weather station with farmers. It's also a fully open platform for IoT learning
Project Owner Contributor

Rezodo: Long Range irrigation and weather station

jp-gleyzesJP Gleyzes

5.4k
95
66
Ultra low power monitoring of temperature, humidity, pressure, reed contacts and motion. With Encryption!
Project Owner Contributor

Canique Ambience

caniquecanique

3.1k
47
39
Open Design Ultra Low Power Sensor Tag for light, temperature, humidity and pressure. openthread on Zephyr with json to MQTT and Grafana
Project Owner Contributor

Openthread Sensor Tag

wassimWassim

432
4
4
Timed E-bike charger using a EP10 smart plug and python-kasa, automatically turns off the charger after a few hours.
Project Owner Contributor

Timed E-bike charger using a smart plug and python

randy-elwinRandy Elwin

989
10
10
Adding a WiFi, NTP and MQTT remote control & measurement unit to a storage heater.
Project Owner Contributor

IoT Storage Water Heater Control

keri-szafirKeri Szafir

185
0
0
Vision AI acceleration on FPGA devices running MicroPython
Project Owner Contributor

Vision AI acceleration with FPGA/MicroPython

vuong-nguyenVuong Nguyen

2k
21
15
Esphome based controller for underfloor heating valves to safe energy when you are not at home.
Project Owner Contributor

Smart Underfloor Heating Controller

red-tukaRed Tuka

962
3
2
Read pulse output from power meters ( or other ) than send to the internet via LTE connection
Project Owner Contributor

Multi-Meter Pulse Reader with ESP32-S3 and LTE

davideDavide

1.8k
13
14
Easy to build eInk mod for the 5"x7" Ikea Ribba pictureframe
Project Owner Contributor

eInk Frame insert for 5"x7" Ribba Pictureframe

fabianFabian

2.3k
34
27
For a house with 5 separate heating zones with four pumps. I needed a configurable controller.
Project Owner Contributor

Multi-Zone Heating Controller

andy-pughAndy Pugh

1.1k
626
7
Retrofit an old clock. Sync to internet time with Network Time Protocol (NTP)
Project Owner Contributor

Upcycling Old Clock with NTP

zst123zst123

2.1k
0
0
A short demo using python-kasa to control a smart plug.
Project Owner Contributor

Using python-kasa to control a smart plug

randy-elwinRandy Elwin

2.3k
23
29
Adorable device to monitor soil moisture and surrounding environments, ensuring your plants thrive in optimal conditions!
Project Owner Contributor

Plantpal: Your Pal in Plant Care

teapot-laboratoriesTeapot Laboratories

2.8k
1.6k
20
A temperature & humidity sensor ecosystem designed for ultra low power and ultra high security.
Project Owner Contributor

Canique Climat

caniquecanique

1.1k
1.4k
10
Bring real-time IoT to old mechanical energy meter
Project Owner Contributor

IoT for old Energy Meter

cziter15cziter15

202
1
2
Reading smart meters with meterbus (MBUS) interface with Raspberry Pi Pico
Project Owner Contributor

M-BUS HATs for Raspberry Pi Pico

hwhardsofthwhardsoft

819
7
7
Enter your home with a push of a button
Project Owner Contributor

Keyless Home Entry

avishorpavishorp

879
5
9
No more obsessive phone checking—see the lightning bolt sun rise as the kW do!
Project Owner Contributor

Solar Power Gauge

benBen

2k
27
21
Replace your old alarm system panel with a new board with up to 42 zones that will integrate with Home Assistant
Project Owner Contributor

ESP32 Replacement Alarm Panel for Home Assistant

kevinKevin

2.1k
19
15
Add voice control to any projects with an easy-to-build combination of off-the-shelf hardware and open source software.
Project Owner Contributor

Build Your Own Voice Control Module

dennisDennis

386
1
3
Revolutionizing Waste Management: A Machine Learning and Computer Vision Enabled Robot Arm for Efficient Garbage Recycling
Project Owner Contributor

Sorting Garbage With a 3d Printed Robot Arm

partapPartap

116
0
0
m-bus (meterbus) master extension (wing) for feather shaped microcontroller boards.
Project Owner Contributor

M-BUS master Feather wing

hwhardsofthwhardsoft

121
0
0
Created an Arduino/NodeMCU based indoor dial thermometer
Project Owner Contributor

NodeMCU Based: 3D Printed Indoor Gauge Thermometer

hulkHulk

5.7k
34
33
Monitor pellet boiler status via CAN bus, measure fuel usage - RE + engineering = profit !
Project Owner Contributor

PelletMon - IoT for central heating boiler.

cziter15cziter15

failed to load.